TP-Link TL-SL3226P manual 24+2G Gigabit Managed Switch Users Guide, System Configuration, Remark

Figure 4-3 System Configuration

Remarks:

! System Information

When you configure System Information, only System Name, System Contact and System Location can be changed. Others of System Information are only for read.

! Module Information

1) If yo u use modules, you can configure the responding module slot. Slot 1 Port 25

Slot 2 Port 26

2) If you install modules, the module information will be showed according to the specific modules.

100M UTP module: 100BASE-TX

100M Fiber module: 100BASE-FX

Gig abit UTP module: 1000BASE-T

Gig abit Fiber module: 1000BASE-LX/SX

TL-SL3226P 24+2G Gigabit Managed Switch User's Guide

The assumpsit of normal control button in the operating interface is as following:

<Arrow Key>= Direction Button: up, down, left, right moves cursor

<Tab> =Tab Button: move the cursor to the next stay place

<W>, <w> = W, w Button: move the cursor up

<S>, <s> = S, s Button: move the cursor down

<A>, <a> = S, s Button: move the cursor left

<D>, <d> = D, d Button: move the cursor right

<Esc> = Esc Button: exit the current menu

<Enter> = Enter Button: enter the next sub-directory or active the revision

<Space> = Space Button: switch the choice

<Backspace> = Backspace Button: delete one letter

<^U> = press U button after press Ctrl button (Ctrl + U): active the revision data

<^A> = press A button after press Ctrl button (Ctrl + A): choose all letter where the cursor locates

Remark:

The revised configuration won't be effect without activation. The effect configuration is effective before the next startup. In order to effect the configuration after next startup, you need to enter into the SAVE and RESET menu of System configuration menu to save the configuration.

4.4.1 System Configuration

TL-SL3226P

24+2G Gigabit Managed Switch User's Guide