•Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption. "Disabled" means this WEP key entry is invalid.
1)For 64-bitencryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters.
2)For 128-bitencryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters.
3)For 152-bitencryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters.
)Note:
If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type.
¾WPA-PSK/WPA2-PSK - Select WPA based on pre-shared key.
•Version - You can select one of following versions.
1)Automatic - Select WPA-PSKor WPA2-PSKautomatically based on the wireless station's capability and request.
2)WPA-PSK - Pre-shared key of WPA.
3)WPA2-PSK - Pre-shared key of WPA2.
•Encryption - When you select WPA-PSK or WPA2-PSK for Authentication Type, you can select either Automatic, TKIP or AES as Encryption.
•PSK Passphrase - Enter a passphrase here.
•Group Key Update Period - Specify the group key update interval in seconds. The value can be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
)Note:
You will be reminded to reboot the device after clicking the Save button.
