4.5.3 Wireless MAC Filtering

TL-WA730RE150Mbps Wireless Range Extender User Guide

Group Key Update Period - Specify the group key update interval in seconds. The value can be either 0 or at least 30. Enter 0 to disable the update.

Be sure to click the Save button to save your settings on this page.

)Note:

You will be reminded to reboot the device after clicking the Save button.

4.5.3 Wireless MAC Filtering

Selecting Wireless > Wireless MAC Filtering will allow you to set up some filtering rules to control wireless stations accessing the device, which depend on the station’s MAC address on the following screen as shown Figure 4-12.This function is not available when the operation is set to Client. As the configuration is the same in each operation mode, here we just take the Access Point for example.

Figure 4-12 Wireless MAC address Filtering

The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the device, which depend on the station's MAC addresses.

¾Operation Mode - Shows the current operation mode.

¾Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address Filtering. The default setting is disabled.

To Add a Wireless MAC Address filtering entry, click the Add New… button. The “Add or Modify Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-13.

32

Page 39
Image 39
TP-Link manual Wireless MAC Filtering, TL-WA730RE 150Mbps Wireless Range Extender User Guide