Reboot | TP-Link TL-WA730RE guide

To restore the device's configuration, follow these instructions:

TL-WA730RE150Mbps Wireless Range Extender User Guide

Figure 4-28 Save or Restore the Configuration Click Backup to save all configuration settings to your local computer as a file.

To restore the device's configuration, follow these instructions:

•Click Browse… to find the configuration file which you want to restore.

•Click Restore to update the configuration with the file whose path is the one you have input or selected in the blank.

)Note:

1.The current configuration will be covered with the uploading configuration file.

2.Wrong process will lead the device unmanaged.

3.The restoring process lasts for 20 seconds and restart automatically. Do not power off the device during the process to avoid any damage.

4.7.7 Reboot

Selecting System Tools > Reboot allows you to reboot the device on the screen shown in Figure 4-29.

Figure 4-29 Reboot the device

Click the Reboot button to reboot the device.

Some settings of the device will take effect only after rebooting, which include:

•Change LAN IP Address (System will reboot automatically).

•Change the Wireless configurations.

•Change the Web Management Port.

•Upgrade the firmware of the device (system will reboot automatically).

•Restore the device's settings to factory defaults (system will reboot automatically).

•Update the configuration with a file (system will reboot automatically).

47

Image 54

TP-Link Reboot, TL-WA730RE 150Mbps Wireless Range Extender User Guide, Wrong process will lead the device unmanaged

Contents

TL-WA730RE 150Mbps Wireless Range Extender Rev 1.0.0 COPYRIGHT & TRADEMARKS All rights reserved FCC STATEMENT CE Mark WarningFCC RF Radiation Exposure Statement Restriction National restrictionsCountry Reason/remark ETSI EN 300 328 V1.7.1 DECLARATION OF CONFORMITYProduct Description 150Mbps Wireless Range Extender ETSI EN 301 489-1 V1.8.12008& ETSI EN 301 489-17 EN60950-12006 Hardware Installation CONTENTSPackage Contents Chapter 3 Quick Installation Guide Appendix D Specifications Appendix B Factory DefaultsAppendix C Troubleshooting Appendix A Application Example Package Contents Conventions Chapter 2 Hardware Installation Overview of This GuidePackage Contents Chapter3 Quick Installation Guide that the AP will automatically assign an IP address for Introduces how to set your AP to be a DHCP server so4.6 DHCP your PC Chapter 1 Introduction 1.2 Main FeaturesFeatures 1.1 Product Overview TL-WA730RE 150Mbps Wireless Range Extender User Guide 1.3 Appearance1.3.1 The Front Panel LED Explanation 1.3.2 The Rear Panel Ensure the Range Extender is powered on before it restarts completely 2.1 Before You Begin Chapter 2 Hardware Installation2.3 Connecting the Device 2.2 Basic Requirements 1. Connect the Cable or DSL modem to a Router Chapter 3 Quick Installation Guide 3.1 Configure the PC 150Mbps Wireless Range Extender User Guide 1 Select Use the following IP address 3.2 Quick Setup Figure 3-9 Quick Setup Figure 3-12 Quick Setup - Range Extender Mode Figure 3-11 AP List B. When you choose Access Point, take the following steps TL-WA730RE 150Mbps Wireless Range Extender User Guide Chapter 4 Configure the Device 4.1 Status 4.2 Quick Setup 4.3 QSS To add a new device Method One Figure 4-3 Add A New Device Next TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.4 Network 4.5 Wireless 4.5.1 Wireless Settings TL-WA730RE 150Mbps Wireless Range Extender User Guide TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.5.2 Wireless Security 1 Range Extender ¾ WPA-PSK/ WPA2-PSK - Select WPA based on pre-shared key 2 Access Point TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.5.3 Wireless MAC Filtering To set up an entry, follow these instructions To modify or delete an existing entry 4.5.4 Wireless Advanced 4.5.5 Throughput Monitor 4.5.6 Wireless Statistics 4.6 DHCP This page will be refreshed automatically every 5 seconds 4.6.1 DHCP Settings 4.6.2 DHCP Clients List 4.6.3 Address Reservation To Reserve IP addresses 4.7 System ToolsThe changes wont take effect until the device reboots To modify A Reserved IP address 4.7.1 SNMP 4.7.2 Diagnostic Figure 4-23 Diagnostic 4.7.3 Ping Watch Dog 1 Only one user can use this tool at one time 4.7.4 Firmware Upgrade 4.7.5 Factory Defaults 4.7.6 Backup & RestoreTo upgrade the devices firmware, follow these instructions 4.7.7 Reboot To restore the devices configuration, follow these instructions2. Wrong process will lead the device unmanaged 4.7.8 Password 4.7.9 System Log Figure 4-31 System Log Appendix A Application Example 3 Right-click the wireless connection icon “” on the screen of the PC and then select View Available Wireless Networks TL-WA730RE 150Mbps Wireless Range Extender User Guide Common Default Settings Appendix B Factory DefaultsDefault Value Wireless Appendix C Troubleshooting 1. No LEDs are lit on the access point2. The LAN LED is not lit Appendix D Specifications GeneralPhysical and Environment Appendix E Glossary TL-WA730RE 150Mbps Wireless Range Extender User Guide