Firmware Upgrade | TP-Link TL-WA730RE specification

4.7.4 Firmware Upgrade

TL-WA730RE150Mbps Wireless Range Extender User Guide

Figure 4-25 Ping Watch Dog Utility

¾Enable - Turn on/off Ping Watch Dog.

¾IP Address - The IP address of the target host where the Ping Watch Dog Utility is sending ping packets.

¾Interval - Time internal between two ping packets which are sent out continuously.

¾Delay - Time delay before first ping packet is sent out when the device is restarted.

¾Fail Count - Upper limit of the ping packet the device can drop continuously. If this value is overrun, the device will restart automatically.

Be sure to click the Save button to make your settings in operation.

4.7.4 Firmware Upgrade

Selecting System Tools > Firmware Upgrade allows you to upgrade the latest version of firmware for the device on the screen shown in Figure 4-26.

Figure 4-26 Firmware Upgrade

New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.

¾Firmware Version - Here displays the current firmware version.

¾Hardware Version - Here displays the current hardware version. The hardware version of the upgrade file must accord with the current hardware version.

45

Image 52

TP-Link manual Firmware Upgrade, TL-WA730RE 150Mbps Wireless Range Extender User Guide

Contents

TL-WA730RE 150Mbps Wireless Range Extender Rev 1.0.0 COPYRIGHT & TRADEMARKS All rights reserved CE Mark Warning FCC STATEMENTFCC RF Radiation Exposure Statement National restrictions CountryRestriction Reason/remark DECLARATION OF CONFORMITY Product Description 150Mbps Wireless Range ExtenderETSI EN 300 328 V1.7.1 ETSI EN 301 489-1 V1.8.12008& ETSI EN 301 489-17 EN60950-12006 CONTENTS Package ContentsHardware Installation Chapter 3 Quick Installation Guide Appendix B Factory Defaults Appendix C TroubleshootingAppendix D Specifications Appendix A Application Example Package Contents Conventions Overview of This Guide Package ContentsChapter 2 Hardware Installation Chapter3 Quick Installation Guide Introduces how to set your AP to be a DHCP server so 4.6 DHCPthat the AP will automatically assign an IP address for your PC 1.2 Main Features FeaturesChapter 1 Introduction 1.1 Product Overview 1.3 Appearance 1.3.1 The Front PanelTL-WA730RE 150Mbps Wireless Range Extender User Guide LED Explanation 1.3.2 The Rear Panel Ensure the Range Extender is powered on before it restarts completely Chapter 2 Hardware Installation 2.3 Connecting the Device2.1 Before You Begin 2.2 Basic Requirements 1. Connect the Cable or DSL modem to a Router Chapter 3 Quick Installation Guide 3.1 Configure the PC 150Mbps Wireless Range Extender User Guide 1 Select Use the following IP address 3.2 Quick Setup Figure 3-9 Quick Setup Figure 3-12 Quick Setup - Range Extender Mode Figure 3-11 AP List B. When you choose Access Point, take the following steps TL-WA730RE 150Mbps Wireless Range Extender User Guide Chapter 4 Configure the Device 4.1 Status 4.2 Quick Setup 4.3 QSS To add a new device Method One Figure 4-3 Add A New Device Next TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.4 Network 4.5 Wireless 4.5.1 Wireless Settings TL-WA730RE 150Mbps Wireless Range Extender User Guide TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.5.2 Wireless Security 1 Range Extender ¾ WPA-PSK/ WPA2-PSK - Select WPA based on pre-shared key 2 Access Point TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.5.3 Wireless MAC Filtering To set up an entry, follow these instructions To modify or delete an existing entry 4.5.4 Wireless Advanced 4.5.5 Throughput Monitor 4.5.6 Wireless Statistics 4.6 DHCP This page will be refreshed automatically every 5 seconds 4.6.1 DHCP Settings 4.6.2 DHCP Clients List 4.6.3 Address Reservation 4.7 System Tools The changes wont take effect until the device rebootsTo Reserve IP addresses To modify A Reserved IP address 4.7.1 SNMP 4.7.2 Diagnostic Figure 4-23 Diagnostic 4.7.3 Ping Watch Dog 1 Only one user can use this tool at one time 4.7.4 Firmware Upgrade 4.7.6 Backup & Restore 4.7.5 Factory DefaultsTo upgrade the devices firmware, follow these instructions To restore the devices configuration, follow these instructions 4.7.7 Reboot2. Wrong process will lead the device unmanaged 4.7.8 Password 4.7.9 System Log Figure 4-31 System Log Appendix A Application Example 3 Right-click the wireless connection icon “” on the screen of the PC and then select View Available Wireless Networks TL-WA730RE 150Mbps Wireless Range Extender User Guide Appendix B Factory Defaults Default ValueCommon Default Settings Wireless 1. No LEDs are lit on the access point Appendix C Troubleshooting2. The LAN LED is not lit General Appendix D SpecificationsPhysical and Environment Appendix E Glossary TL-WA730RE 150Mbps Wireless Range Extender User Guide