Trane CCUN 205-211, CGAN 209-214 Reports Screen, Stop, DynaView Interface, Main Reports Settings

DynaView Interface

Reports Screen

The Reports tab will allow a user to select from a list of possible reports headings.

Each report will generate a list of status items as defined in the following tables.

Figure 6 - Reports screen

Main Reports Settings

Evaporator

Condenser

Compressor

Chiller Log

Auto	Stop	Alarms
Table 3 - Reports screen
Description	Units	Resolution
Evaporator
Evap Entering Water Temp	Temperature	+ or -XXX.X
Evap Leaving Water Temp	Temperature	+ or -XXX.X
Evap Water Flow Switch Status		(Flow, No Flow)
Circuit Evaporator
Evap Sat Rfgt Temp	Temperature	+ or -XXX.X
Suction Pressure	Temperature	+ or -XXX.X
Evap Approach Temp	Temperature	+ or -XXX.X
Condenser
Cond Entering Water Temp	Temperature	+ or -XXX.X
Cond Leaving Water Temp	Temperature	+ or -XXX.X
Cond Water Flow Switch Status	Enumeration	(Flow, No Flow)
Outdoor Air Temperature	Temperature	+ or -XXX.X
Circuit Condenser
Cond Sat Rfgt Temp	Temperature	+ or -XXX.X
Discharge Pressure	Temperature	+ or -XXX.X
Cond Approach Temp	Temperature	+ or -XXX.X
Compressor
Chiller Running Time	hr:min	XXXX:XX
Circuit Compressor
Compressor Starts	Integer	XXXX
Compressor Running Time:	hr:min	XXXX:XX

16 CG-SVU02B-E4