Getting Started | System Information (sysinfo) Page |
********************************* 5 *********************************
[Tx MIR] 50000 Kbps [ARQ] on
[Encrypt] off [Key] 0011 2233 4455 6677 8899 AABB CCDD EEFF [Auto Rate Shift] on
[Auto Scan MU] off [RSSI LED] on
[Remarks] Remarks
********************************* 6 *********************************
[Eth Config] ANEG
[Eth Status] 100 FDX
[Eth In] 35,262,413 bytes 3 Kbps [Eth Out] 9,201,047 bytes 51 Kbps [RF In] 0 bytes 0 Kbps
[RF Out] 0 bytes 0 Kbps
[ARQ Retransmission] 0 pkts
Success.
#>
To view only a particular section of the sysinfo screen, type sysinfo followed by the desired section number.
Example:
#> sysinfo 2
********************************* 2 *********************************
[Radio Temp] 34 C [PoE Voltage] 14.2 V [Opmode] on [Default Opmode] on [Active Channel] 22 h [Freq] 5840 MHz
[Speed] 6 Mbps [Tx Power] 0 dBm [Power Range]
[DFS Status] idle
Success.
#>
Each of the parameters within the sysinfo screen is defined below
Section 0 |
|
[Model] | Radio Model # (P5055M) |
[Unit Type] | User defined Unit Type (MU or RU) |
[Hardware Version] | Hardware version set by factory (5010) |
[Firmware Version] | Current firmware version loaded in radio |
[System Up Time] | Time since last reboot or power cycle |
Section 1 |
|
[MAC] | MAC address of radio |
|
|
Trango Broadband Wireless — | page 17 |
