Guidance Mode
Start Navigating
If your GPS receiver is attached you're ready to start driving! The CoPilot navigation system will guide you to the destination(s) you enter, and recalculate your route should you miss a turn.
Because CoPilot needs to know where you're going in order to give you navigation advice, you must enter a destination. (You do not need to enter an origin. If your GPS receiver is picking up signals, CoPilot will automatically fill in the start place.) In Guidance Mode, the Passenger screen will open and a highlighted route will appear on the map that starts at your current position, and ends at your next stop. Your route will also be tracked on the map while you drive.
NOTE: If Driver is set in the control panel, the Driver Safety screen will appear at more than 10 m.p.h., but CoPilot voice technology will remain active and you'll receive simple turn instructions on the screen.
If you deviate far enough from your
Navigating With a
1.Enter a destination, with or without a street address. You may enter intermediate stops before entering a destination if you like
In the Passenger screen, the control panel will be visible to the right of the map. You'll see your highlighted route drawn on the map from your current position to the destination you entered.
2.Start driving! As your GPS unit receives signals, arrows will appear on the map beginning at your start place and track you as you drive. CoPilot will automatically prompt you and tell you when your next turn is coming up. If you go off route, CoPilot's "dynamic directions" will reroute you to the next stop from your current position.
- 13 -
