6.Start Application: Double-click on the CoPilot 2002 icon on your desktop. If your GPS receiver is plugged in the first time you start the program, you will be greeted and asked to enter a nearby city for the initial satellite search. A dialog box will then appear with a variety of options for entering your destination. Click on any button to enter that type of destination. After just a few seconds, CoPilot will generate a route for you – highlighted in green – on the map. This is the recommended route to your destination.
7.Start Driving: Start driving and listen for CoPilot’s spoken instructions.
Additional Tips:
From the control panel (on the right side of the guidance screen), you can activate various features. NOTE: In the Passenger screen, your map will always be shown. In the Driver Safety screen, your map will not be shown when you drive at more than 10 m.p.h.; however, you will still receive verbal instructions as well as simple printed directions on-screen. The driver should pull over to the side of the road when looking at the map and/or the control panel. Even if a passenger operates the computer, for safety reasons, the driver should never look at the computer screen while driving.
If you happen to go off route, CoPilot will automatically give you new directions. This may take several seconds. Keep driving and be patient.
You must disable your screen saver before using CoPilot. In the Start menu go to Settings, Control Panel, double-click on the Display icon, and select the Screen Saver tab. To deactivate the screen saver go to the drop-down bar and select (None).
