addresses on a LAN with an existing DHCP server may cause problems throughout a network. It is recommended you disable other DHCP serves on the network if you plan on using this product on the network.
IP address conflict
When you see the message box prompted for IP address conflict, this means two or more workstations has the same IP address. If you have setup the device as a DHCP server, please run the "winipcfg" utility to “release” all current configuration first, then “renew” the IP information again. If the DHCP function is disabled and static IP addresses are assigned to each workstation, please double check each workstation’s IP address for duplicate IP.
My Internet application won't work
To protect your computer from Hackers, the product uses “port blocking” technology. A port is like a door into your computer. Each service on the Internet has an associated port. The device protects your computer by closing certain ports, so that malicious programs can't access your computer. However, if you are using an application that requires one of these blocked ports, the application will not work. In this case, you will have to manually open these ports to allow the application to work properly.
Some applications that may be affected are
Some Email Programs
Some
Some Internet Phone/Video Conferencing Applications
Als o, there are some applications, which require reverse connection over the Internet. In other words, when you are connected to these applications, you have to open your ports for two - way connection.
The first thing you will need to do is determined what port (or ports) the application uses. The fastest way to find this information is to go to the software maker's web site, go to the support section, and look for information related to NAT, Proxy Server, or Firewall. This information will typically list 1 to 3 ports that need to be opened for proper operation of the software. If you can't find the necessary information, call the software maker and ask for what ports need to be opened for the software to work through a firewall.
Once you have the necessary port information, follow the instructions below to setup the “Virtual Server”.
A. Launch the Windows GUI Setup Software and press " Find". Once the GUI Setup Software finds the product, press " Configure":
- 35 -
