Triax DVB 63S, DVB 65S Settings Basis UHF-output channel, SCART-mode, Subtitling, Installation

S E T T I N G S

Settings > Basis

UHF-output channel

See page 7.

SCART-mode:

In this line set by means of the OK-buttonin ac- cordance with your tv FBAS, RGB or S-VHS. For standard-tv you let the setting RGB remain.

Subtitling:

In this line set by means of the OK-buttonyou can select subtitle on or off.

Installation

When you have set your receiver according to your individual requirements, you must if required now set the receiver in accordance with your aeri- al. In the factory your receiver was prepro- grammed to ASTRA and EUTELSAT with universal LNB (see chapter Technical Terms). After putting the receiver into operation, these programs will be received on a corresponding receiver system without further settings.

If you also want to receive from other satellites, or want to use another LNB, you set your receiver to the data required as follows:

Press menu to enter the main menu.

Mark with the cursor-buttonthe line settings. Confirm by pressing OK.

Now the menu settings appear.

Mark the line LNB-settingsby means of the cur- sor-button up/down.

Now the menu LNB appears.

14