Triax DVB 65S Connection to a TV set By means of a Scart cable, By means of a HF cable, Procedure

SET- UP AND CONNECTIONS

Connection to a TV set

By means of a SCART cable:

To have the best possible picture quality you should connect re- ceiver and tv by means of a SCART cable.

Procedure:

gConnect receiver (SCART-socket tv) and tv (SCART-socket) by means of a SCART-cable. If your tv is equipped accord- ingly, this will automatically shift to AV and thus to satellite reception when switching on the receiver.

By means of a HF cable:

If your tv is not provided with a SCART-socket, the receiver must be connected to the aerial input of the tv. When using this type of connection, the sound can only be reproduced in mono.

To connect HF cable, proceed as follows:

hConnect the receiver (HF-output) with a suitable tv-connec- tion cable to the aerial inputof the tv. The cable coming from the terrestrial aerial is connected to the Input terres-

trial aerial of the receiver.

cHaving made all connections, you connect the receiver by means of the power supply cable delivered with the receiver to a 230V/50 Hz wall outlet. Now switch on the receiver by pressing the “standby” or “Numeric” buttons.

Now tune in your tv to the transmitter channel of the receiv- er. Select a free program place on the tv and set it to chan- nel 38 (see the user manual of the tv, if necessary).

If you don't get a clear picture on channel 38, this or an adjacent channel could already be occupied by a program which you receive by means of the aerial. You can check this by disconnecting for a very short time the aerial cable from the connector Input terrestrial aerial of the receiver. If you thus for a short time get a clear picture, you should set another transmitter channel in the range 21 to 61 for the re- ceiver.

7