Tripp Lite B022-016, B020-008-17, B020-016-17 warranty Appendix C, Appendix D

Appendix C

Removing the KVM Module from the Console KVM

The KVM module can be removed from the unit chassis. To do so:

1) Slide the unit to the out position.

2) Remove the eight module attachment screws (four above; four below).

3) Remove the cable attachment clip and unplug the data cable.

4) Pull the KVM module away.

Note: The slider brackets and extender arm remain attached to the KVM module.

Removing the Keyboard and Touchpad from the Console KVM

The keyboard and touchpad can be easily removed for repair or replacement:

1)Remove the two attaching screws.

2)Locate the opening toward the front and center of the unit’s bottom panel. The bottom of the keyboard and touchpad module is visible through the opening.

3) Push up on the bottom of the keyboard and touchpad module until it releases from the chassis.

4) Lift the module clear and unplug the cables.

Appendix D

Standard Rack Mounting for B022-016

The standard rack mounting brackets that come attached to the B022-016 allow the unit to be installed in standard 1U racks. Simply slide it into the rack and screw it securely in place.

Rack Mounting for Console KVM

The Console KVMs can be mounted in a 1U system rack. For convenience and flexibility, a rack mounting kit that allows several mounting options has been included.

27