Upgrade Succeeded, Upgrade Failed | Tripp Lite B020-016, B022-016

Upgrade Succeeded

After the upgrade has completed, a screen appears to inform you that the procedure was successful:

Click Finish to close the Firmware Upgrade Utility.

Upgrade Failed

If the upgrade failed to complete successfully, a dialog box appears asking if you want to retry. Click Yes to retry. If you click No, the Upgrade Failed screen appears:

Click Cancel to close the Firmware Upgrade Utility. See the next section, Firmware Upgrade Recovery, for how to proceed.

Firmware Upgrade Recovery

A firmware upgrade recovery is required in any of the following situations:

•When you invoke Firmware Upgrade Mode (see page 22), but decide not to proceed with the upgrade.

•When the main board firmware upgrade fails.

•When the I/O firmware upgrade fails.

Page 23

Image 23

Tripp Lite B022-016, B020-008-17, B020-016-17 warranty Upgrade Succeeded, Upgrade Failed, Firmware Upgrade Recovery

Contents

To prevent damage to this unit or to its connected devices This package should consist Table of Contents Overview Features Include Cables System RequirementsComputer Console for B022-016 only Introduction Front View of Console KVM Switch Station ID LED Front View of B022-016Port LEDs Rear View for B022-016 To set up a daisy-chained installation InstallationSingle-Station Installations Multiple Station Daisy-Chained Installation LCD OSD allows you to set up and configure the LCD display LCD OSD On-Screen Display Configuration Closing the Console KVM Manual Port SwitchingBasic Operation Opening the Console KVM Port ID Numbering Powering Off and RestartingHot Plugging Selecting the Active Port Port Control Using HotkeysInvoking the Hotkey Mode Hotkeys Starting Auto Scan Setting the Scan IntervalPausing in Auto Scan Port ID Enter Skip ModeHotkey Beeper Control Hotkey Summary Table OSD Navigation OSD On-Screen Display OperationOSD Overview F1 Go To Goto OSD Main Screen HeadingsOSD Functions Heading Explanation OSD Hotkey F3 Set Environment SET Password F4 Administrator ADM F5 Skip SKP F6 Broadcast Mode BRC F8 Log Out Lout F7 Scan Scan Before You Begin Firmware Upgrade UtilityTo prepare for the firmware upgrade, do the following To upgrade your firmware Starting the Upgrade Firmware Upgrade Recovery Upgrade SucceededUpgrade Failed Computer Connection Table OSD Factory Default SettingsSetting Default Appendix a Function B020-008 B020-016 B022-016 TroubleshootingSpecifications Symptom Possible Cause Action Clear Log-in Information Appendix B Appendix D Appendix C FCC Radio/TV Interference Notice Appendix E Addendum

Tripp Lite B020-016, B022-016 warranty Upgrade Succeeded, Upgrade Failed, Firmware Upgrade Recovery

Models: B022-016 B020-016 B020-008-17 B020-016-17

Upgrade Succeeded

Upgrade Failed

Firmware Upgrade Recovery