Tripp Lite
| Configuration |
|
|
|
|
| You have previously installed the UPS, and you are ready to |
| configure the SNMP Solo to work on your network. SNMP Solo |
| is temporarily connected to a PC with a terminal emulation |
| package or to a dumb terminal. |
|
|
NOTE: | Refer to the Installation section for the proper setting of the |
| hardware adapter prior to configuring the device. |
| Press any key to display the Main Menu. From this menu you |
| can select to enter the IP address, Gateway address, and MIB |
| system group; you can set the access controls of SNMP |
| communities; set traps, display settings; reset the settings to |
| default values; save the new values and exit the program, and |
| upgrade Firmware (See caution in the Upgrade Firmware |
| section); and exit without saving. |
Figure 5 Main Menu
To select any option on the Main Menu, enter the number of the option you want at the Choose a Number=> prompt. The program displays the desired screen.
Configuration11
