Tripp Lite MT-SE-37/02 owner manual Configuring the NMS, General Network Management Stations

Tripp Lite

Configuring the NMS

To complete the SNMP Solo installation and configuration process, you must compile the necessary MIBs to configure the NMS.

Any NMS with a MIB compiler can manage the SNMP Solo adapter. For instructions on how to compile MIBs for the most popular NMSs—Novell’s NetWare Management Station, Hewlett-Packard’s OpenView Network Node Manager, and SunConnect’s SunNet Manager; see the corresponding heading below.

General Network Management Stations

Follow these general procedures to configure an NMS:

•Compile the device MIBs.

•Add SNMP Solo object to the Management Map.

•Ping the SNMP Solo.

HP OpenView Network Node Manager for HP-

UX

Compile the Device MIB

8.Copy the UPS MIB file from the TAR formatted diskette into the subdirectory /usr/OV/snmp_mibs.

9.From the main menu, select Options

10.Load/Unload MIBs: SNMP...

11.Select Load.

12.Select the MIB file copied earlier.

13.Select OK.

Add SNMP Solo Object to the Management Map

1.Select the submap then Edit: Add Object.

2.Select the group computer.

3.With the middle (or opposite) mouse button, drag the generic symbol subclass device to the submap.

Configuring the NMS 25