Tripp Lite MT-SE-37/02 owner manual Trap Receivers

Tripp Lite

Figure 8 Trap Receivers

To set traps, at the prompt type:

Set, <space>, enter the number of the column from 1 through 4, <space>, enter the IP address, <space>, severity code–1,2, or 3, and name of the community string. Press <enter>. The severity level codes for messages are:

•1 Informational

•2 Warning

•3 Severe

The trap receiver receives all assigned severity level messages and the ones rated above. If you assign severity code 2, the manager receives warning and severe levels.

A set trap example.

The top of the screen reflects your changes:

Configuration17