SNMP Solo |
|
|
Compile the Device MIB | 25 | |
Add SNMP Solo Object to the Management Map.. | 25 | |
Poll the Device OIDs | 26 | |
Set the Device OIDs | 26 | |
Ping the SNMP Solo | 26 | |
Novell’s NetWare Management Station v.2.0... | 26 | |
Compile the Device MIB | 26 | |
Add SNMP Solo Object to the Management Map | 27 | |
Poll the Device OIDs | 27 | |
Set the Device OIDs | 27 | |
Ping the SNMP Solo | 27 | |
SunConnect SunNet Manager | 28 | |
Compile the Device MIB | 28 | |
Add SNMP Solo Object to the Management Map | 28 | |
Poll the Device OIDs | 29 | |
Set the device OIDs | 29 | |
Ping the SNMP Solo | 29 | |
Appendix | 30 | |
Reference | 30 | |
Communities | 30 | |
IP Addresses | 30 | |
Subnetting and Subnet Masks | 31 | |
Gateways | 32 | |
Glossary | 33 | |
Troubleshooting | 35 | |
Placing a Technical Support Call | 36 | |
Reference Worksheet | 38 | |
TABLE OF FIGURES |
| |
Figure 1 SNMP Solo Monitoring a UPS on EtherNet | 2 | |
Figure 2 SNMP Solo Network Connection Panel | 3 | |
Figure 3 SNMP Solo Serial Port Panel | 4 | |
Figure 4 Communication Screen (Windows) | 10 | |
Figure 5 Main Menu | 11 | |
Figure 6 IP Address for the SNMP Solo and More | 12 | |
Figure 7 | Access Controls | 15 |
Figure 8 | Trap Receivers | 17 |
Figure 9 | Additional Setup Screen | 18 |
Figure 10 | Display All Current Settings | 19 |
Figure 11 Reset Values To Default | 20 | |
Figure 12 Save and Exit Messages For Configuration | 20 | |
Figure 13 Telnet Options | 21 | |
iiIntroduction
