True Fitness PS75 manual How To Record Run User Programs, Create a User Program

HowtoRecord& Run& RunUserUserProgramsPrograms

CHAPTER THREE: USER PROGRAMS

Create a User Program

�������������

1.Press User Program Key on console.

2.Select User 1 or 2 by pressing key once or twice (there are two user programs available).

3.Enter your desired workout time and begin using treadmill in a manually-controlled workout.

4.The treadmill will “record” any changes you make in speed or incline. Up to 36 changes in speed or incline can be recorded. Each speed/incline pair of changes must be separated by at least 30 seconds.

Note on varying the workout time: When you “record” a user program over a specified workout time, the speed and incline changes are stored relative to that time.

What happens when you choose a user program that was recorded over 20 minutes, but then change the “playback” time to 30 minutes? The program “stretches” out over the longer time, automatically scaling the shorter time to the longer time.

The reverse is also true: a 20-minute recorded program played back over 10 minutes compresses each of the speed and incline segments.

How To

Record

And Run

User

Programs

24PS 75 Treadmill Owner’s Guide