2. The HR display will start to flash. Set the desired heart rate value (default 110 bpm) by using the arrow keys. Press ENTER. NOTE! The preset value can be changed during the training.
3. The TIME display will start to flash. Choose the desired duration of workout by using the arrow keys
4. The Total Counts display starts to flash. The display reads KG _. Enter your weight using the arrow keys (default value 70 kg). Press ENTER.
5.Begin your workout. If the set heart rate value seems too strenuous or easy, change the heart rate value by using the arrow keys. The columns in the display show the present heart rate level.
PAUSE
The values in a workout that has been interrupted are saved in the memory of the meter for 5 minutes, after which they are RESET. You can restart the interrupted exercise by pedaling within 5 minutes.
TRANSPORT AND STORAGE
Please follow these instructions when carrying and moving the equipment about, because lifting it incorrectly may strain your back or risk other accidents:
NOTE! Always switch the power off and unplug the power cord before you start moving the equipment around!
The device is easy to move by pushing along on the integrated transport wheels. Tilt the device from the front and push along the floor on the wheels at the front support.
To prevent the equipment malfunctioning, store in a dry place with as little temperature variation as possible and protected from dust.
MAINTENANCE
The equipment requires very little maintenance. Check, however, from
•After exercising, clean the equipment with a soft, absorbent cloth. Do not use solvents. Sweat may cause corrosion: we recommend therefore that you protect all metal surfaces outside the plastic covers with teflon.
•Never remove the equipment’s protective casing.
•If the equipment is not used for a period of time, the transmission belt may become temporarily distorted. This can lead to a sensation of slightly uneven pedaling. However, after a few minutes of use the effect disappears as the belt returns to its original form.
MALFUNCTIONS
NOTE! Despite continuous quality control, defects and malfunctions caused by individual components may occur in the equipment. In most cases it’s unnecessary
G B
O W N E R ' S M A N U A L • C 4 0
to take the whole device in for repair, as it’s usually sufficient to replace the defective part. Always give the model, serial number of your equipment and in case of malfunctions also conditions of use, nature of malfunction and any error code.
When you encounter unusual behavior from the device, simply turn the power off, wait 1 minute and turn the power on. This should clear incidental errors and ready the device for normal operation again. If after you have reset the device by turning the power off and on again, and the device is still not operational, contact your local Tunturi dealer for service.
If you require spare parts, always give the model, serial number of your equipment and the spare part number for the part you need. The spare part list is at the back of this manual. Use only spare parts mentioned in the spare part list.
TECHNICAL SPECIFICATIONS
Length | 146 cm |
Width | 65 cm |
Height | 157 cm |
Weight | 68 kg |
The C40 meets the requirements of the EU’s EMC Directives on electromagnetic compatibility (89/336/ EEC) and electrical equipment designed for use within certain voltage limits (73/23/EEC). This product therefore carries the CE label.
The North American versions (115 V) comply with FCC requirements on electromagnetic compatibility and are accordingly marked with the FCC label. The North American versions also comply with the following safety standards: UL 1647 and CSA C 22.2 No.
The C40 crosstrainer meets EN precision and safety standards (Class A,
Due to our continuous policy of product development, Tunturi reserves the right to change specifications without notice.
NOTE! The instructions must be followed carefully in the assembly, use and maintenance of your equipment. The warranty does not cover damage due to negligence of the assembly, adjustment and maintenance instructions described herein. Changes or modifications not expressly approved by Tunturi Oy Ltd will void the user’s authority to operate the equipment!
We wish you many enjoyable trainings with your new Tunturi training partner!
9
