2.4 Rack mounting
on the front of the unit) are fixed to the front end of the rail.
3. Fully extend the sliding rails until they lock.
Note: Do not tighten the brackets to the rails as you will need to adjust their position later.
4.Screw each sliding rail to the side of the Transport GX21 as shown. You will need 3 short, silver colored screws from the supplied nuts, screws and washers kit, for each rail.
5. Return the sliding rails to their shortest position.
Note: When fully extended, the sliding rails will lock. The release mechanism is located on the sliding rail as shown. Press the
Chapter 2: Setting up | 35 |
