3.6Replacing the storage backplane

1.Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

2.Remove the two screws that secure the metal retaining plate to the chassis and lift it free as shown.

3.Remove all cables connected to the S-ATA backplane, including front panel cable, power cables, and S-ATA data cables.

4.Remove the six screws that secure the S-ATA backplane bracket to the chassis.

5.Remove the S-ATA backplane bracket and backplanes free from the chassis.

Chapter 3: Replacing pre-installed components

51

Page 59
Image 59
Tyan Computer B2735 user manual Replacing the storage backplane