Tyan Computer B4881V50S4H user manual Replacing the floppy disk drive

3.4Replacing the floppy disk drive

6.Secure the backplane to the new CD-ROM drive with two screws.

7.Slide a new CD-ROM unit into the cradle and secure it with four screws.

8.Slide the cradle with the new CD-ROM unit back into place in the chassis. The release catch will click and secure the cradle in place.

9.Replace the data and power cables.

3.4Replacing the floppy disk drive

This section describes how to replace the SCSI backplane on your B4881V50S4H.

1.Loosen the two screws that secure the lower cover to the chassis of the B4881V50S4H. Slide the cover back and remove it to expose the service port for the floppy disk drive.

40 Chapter 3: Replacing pre-installed components