3.5Replacing the SATA backplane
2.Remove the power and data cables from the floppy disk drive.
3.Loosen the two retaining screws that secures the floppy disk drive in place.
4. Slide the disk drive from the chassis.
5.Slide the new unit into place, secure with the retaining screw and replace the power and data cables.
3.5Replacing the SATA backplane
This section describes how to replace the SATA backplane on your B4881V50S4H.
1.Remove the chassis cover. See Removing the chassis cover on page 13.
Chapter 3: Replacing | 41 |
