Tyan Computer B4881V50S4H user manual Installing hard drives, Installing PCI-X cards

2.3Installing hard drives

2.2.5Installing PCI-X cards

Follow the instructions in this section to install a PCI card in your system.

1.Remove the chassis cover. See Removing the chassis cover on page 13.

2.Remove a blanking plate from the rear panel of the chas- sis as shown.

3. Insert the PCI/PCI-X card into a spare slot as shown.

4.Secure the PCI card with the screw you removed with the blanking plate.

Screws Required	Location
1 hex head #6-32-L6	PCI card

2.3Installing hard drives

The B4881V50S4H supports eight, hot-swappable SCSI or SATA hard drives. The unit is shipped with four hot-swap bays and a SATA back plane. A further four hot-swap bays can be added with either a SATA or SCSI backplane.

20 Chapter 2: Setting up