|
|
| 2.3 Installing hard drives | |
|
|
|
|
|
|
| Screws Required | Location |
|
|
|
|
|
|
| 6 | Pan Head screws, | Backplane |
|
|
|
|
|
|
| 2 | Hex head | Cradle locking bar |
|
|
|
|
|
|
2.3.2Installing SATA/SCSI hot swap drives
1.Press the release clip and pull the release lever to unlock the drive tray from the chassis.
2.Pull the empty drive tray from the chassis.
3.Remove the four screws holding the plastic spacer in place in the drive tray and remove it from the tray.
4.Place a SATA or SCSI drive in place in the drive tray and secure with four screws.
Chapter 2: Setting up | 23 |
