BASIC USE
Making and answering calls
To make a | 1 |
call
2
Key in the telephone number
If you make a mistake, press the left Soft button [Clear] to clear digits from the display.
Press the PHONE button
(You can dial the number after you press the PHONE button to get Dial tone if you prefer, but you won’t be able to correct any mistakes if you do it this way.)
uAfter a few seconds, the display shows the call’s duration in minutes and seconds.
To answer a When there’s an incoming call, Incoming Call! or the
callphone number (if you subscribe to Caller Display: see page 22) appears on the display; if the number is stored in your Phone Book (see page 17), the caller’s name may also appear.
The base unit and handset ring (unless the ringer is turned off). If you’ve stored the caller’s number as a VIP entry in the Phone Book (see page 18) and you sub- scribe to Caller Display, the handset will ring with a special melody.
◗Press any button (except the HANG UP button) to answer the call
Note — you may notice that the DECT 1915/1915+1 starts ringing a few moments after any other phone you have connected to your line. This is not a fault — it’s part of the design of the system, to enable it to receive SMS text messages.
… and if you |
| You can silence the ringing by pressing the left |
don’t want to |
| Soft button to select Silent. |
answer |
|
|
13
