There is inter, Ference, Noise on, Line, From my | Uniden DECT1915

		Troubleshooting

“There is inter-		Move the handset closer to the base unit, or to a
	ference and	different position.
	noise on the
	noise on the	Try moving the base unit so that it’s not near other
	line.”	Try moving the base unit so that it’s not near other
	line.”	electrical equipment, such as a television or a
		electrical equipment, such as a television or a
		computer.

		You’ll get the best results if you site the base unit as
		high as possible. For example, in a two-storey house,
		the first-floor landing is an ideal place for the base unit.

“I hear ‘beeps’		You may be going out of range of the base unit. Move
	from my	closer, or your call may be cut off.
	handset while
	handset while	Check the Battery Level symbol on the display. If it’s
	I’m on a call.”	Check the Battery Level symbol on the display. If it’s
	I’m on a call.”	low, recharge the batteries.
		low, recharge the batteries.

“The handset’s		Check that the base unit’s mains power adapter is
	display shows	plugged in and power is switched on.
	No Base Found”
	No Base Found”	Move the handset closer to the base unit.
		Move the handset closer to the base unit.

		If you have a new handset, not supplied as part of your
		original DECT 1915/1915+1 system, you need to register it
		to the base unit (see page 28).
		If the batteries have become completely run down (or if
		the handset is switched off) and you place the handset
		in the charging cradle, it may take about 5 minutes to
		link with the base station. Wait and try again.

“The Caller		You need to subscribe to the Caller Display feature
	Display feature	from your network service provider. You should
	isn’t working.”	find contact details on your phone bill.
		The caller may have withheld their number .
		Or they may be calling from a network that does
		not transmit the caller’s number (for example, it may be
		an international call).

49

Image 52

Uniden DECT1915 There is inter, Ference, Noise on, Line, Hear ‘beeps’, From my, Handset while, ’m on a call, Handset’s

Contents

DECT1915/1915+1 If you need help … Important note emergency callsUnpacking your DECT1915/1915+1 system Press the button to switch the handset on DisplayArrow buttons Left and right Soft Buttons Headset socket Contents Contents Connection and conditions for use Read these notes first Installation and set-up If you have one or more charger pods … Connection to the telephone line Safety Before you startElectrical Move to a different position to clear the interference Exploring the display To lock the keypad Shortcut buttonsPress the Hang UP button and hold it for about 2 seconds Switching on and off To switch Handset on OffVolumes Press the Hang UP button and hold it for 4 seconds Your handset’s name Idle mode Press the right Soft button to select Time and dateKey in the date as a six-digit number then select OK Display shows Time and the current time Making and answering calls To make a Call Key in the telephone numberPress the Phone button Don’t want to Soft button to select Silent Answer Volume Press the or button You can mute the microphone so the personOn the other end can’t hear you To mute and un-mute the microphone Press the left Soft button Redial Last Number Redial … and options Redial listDisplay shows a list of up to 10 numbers Cancel without deleting the entry Back to cancelIf you’ve selected Delete entry, you’ll be Press the right Soft button OK to delete Phone Book memory dialling To open Phone Book To store a NumberPress the right Soft button twice Menu V OK Press the right Soft button OK Key in the phone numbers, using the numbered buttons Clear to clear characters from the displayUse the or button to go to H M or O Use the or button to go to Idle mode Display showsPress the short-cut button Display shows a list of names Display shows the Phone Book entry Display goes back to the Phone Book options menu Or the left Soft button Back to cancel To idle modeTo to idle mode To delete a Caller Display Press the button Press the or button to scroll between new records If you select Delete all, you’ll be asked If you select Delete entry, you’ll be askedDisplay shows the new Phone Book entry Using a multi-handset system Line at once. If you try to make a call while anotherDisplay a list of handset numbers Key in a handset number To transfer a Wait for the other user to answerPress the Hang UP button to hang up Transfer the call Press the right Soft button Conf Press the Handset Locator button on the base unit Handset registration To register To an extraBase unit Without a tick To de-register Press the right Soft button Menu, then With which it can best set up a radio link To select aBase unit manually You don’t need this function if you have Handset registration SMS text messaging read this first ServiceSMS 01983391 All messagesIt’s important to leave these numbers as they are. If They’ve been accidentally changed, you’ll need to Display shows Enter Message SMS text messagingWrite your message Display shows Send Message Display shows Enter Tel NoDisplay shows Send For a few moments To read your MessagesDisplayed above the left Soft button Or press the left Soft button SMS to go … or to delete Messages from the Inbox Press the right Soft button OK to send the message Display shows the number of the person who sent the messageYou’ll be asked Are you sure? Scroll to Settings and press the right Soft To check orChange Button OK to select it Quick reference guide to the menus See To change the way the handset is configured To set the handset so that a given number is auto To set a PIN code for the handset. By default,Incoming call by simply lifting the handset. If you Not just your individual handset To bar prevent certain typesTo bar outgoing calls to phone Numbers starting with specified First number has been preset to 000 for To change the length of the Flash To use your handset as a stopwatch timer Set Default To return all system settings to their defaultsTo view a calendar Engineers. Never attempt any repairs or adjustments TroubleshootingEveryday use Out of range. Now I can’t use my handset Display feature There is interFerence Noise on Using a multi-handset system SMS text messagingSend Terminal Batteries PBX use If the fault persists … Cleaning and care Technical details Index Last Number Redial, 15 on a PBX Locking the keypad Index Warranty Buttons to press for text characters Y z Y Z