Troubleshooting
!engineers. NEVER attempt any repairs or adjustments
yourself — you could make the problem worse and invalidate the Guarantee.The DECT 1915/1915+1 must be serviced by trained
ALWAYS check ■ you have followed all the steps listed on pages 4 to 6
first that:to install and set up your DECT 1915/1915+1
■all connectors are firmly inserted in their sockets
■mains power to the base unit is switched on at the socket
■the handset’s batteries are correctly and securely installed, and are not run down
Everyday use
“I cannot make If the handset’s display is blank, it may be switched off. or answer calls.” Press the HANG UP button to switch it back on.
Check that the base unit’s mains power adapter is plugged in and power is switched on. The base unit needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the telephone line cable supplied with your DECT 1915/1915+1. Other telephone line cables might not work.
Move the handset closer to the base unit.
Check the Battery Level symbol on the display. If it is low, replace the handset on the base unit or charger pod to recharge the batteries.
Switch off power at the mains socket, wait for a few seconds and then switch back on. This may solve the problem.
47
