Where to find it
Display
For details of how to change the screen background, refer to the Extra menu functions in the section headed ‘Quick reference guide to the menus’.
To subscribe to network features like Caller Display and Call Waiting, simply call your network service provider (the company which supplies your telephone line). You don’t need to do anything special on your DECT 1915/1915+1 phone to set these features up.
Arrow 
buttons
Left and right Soft | buttons |
Press to select the functions shown above them on the display (for example, Redial or Menu).
Headset socket
(Headset is not available for this model)
PHONE 
button
Press to begin or answer a phone call.
Press during a call to switch the speakerphone on and off.
Press or during a call to adjust the volume in the earpiece.
Press to navigate through the menu on the display.
Press in idle mode for
HANG UP 
/C/
button
Press to end a call.
Press while using menus to cancel and return to idle mode.
Press and hold for 2 seconds to lock and unlock the keypad.
Press and hold for 4 seconds to turn the handset on and off.
F(Flash) button #
Short cuts
to go straight to the SMS text messages menu.
to display a calendar showing today’s date.
to go straight to a list of Caller Display (CID) records.
to go straight to a list of Phone Book entries.
(Note: the speakerphone won’t work if the batteries are low.)
INT
(Intercom) button
Press and hold for 1 second to make an intercom call (if you have more than one handset).
CHARGE light
This comes on when the handset’s batteries are being charged.
If the display is blank
Press the 
button to switch the handset on
You may need this during a call if your DECT 1915/1915+1 is connected to a PBX, or if you use a Call Waiting service provided by your network provider.
PBX: Press and hold this button for a Flash signal.
CW: If the Call Waiting tone sounds during a call Press and hold this button then 2 to switch between callers.
IN USE light
This comes on when you have a connection to the telephone line.
HANDSET LOCATOR button
Press to make all registered handsets ring (useful if you've forgotten where you put a handset).
Before you can use the handset to make calls you will need to fit and fully charge the batteries, as described on pages 4 to 6.
