Installation and
8 Charge the batteries for 15 hours
Before you use the handset for the first time, it’s important to charge the batteries fully.
The handset ‘beeps’ when it’s correctly in position on the charging cradle.
Leave the handset on the charging cradle for 15 hours.
The battery charge level symbol should increase by one bar every half hour when you’re charging an empty battery. If you think that the symbol isn’t showing the correct battery charge level, remove and refit the batteries.
Battery charge level symbol
Keeping the batteries charged
When you don’t need to use the handset (for example, overnight or when you go out), replace it on the base unit or charger pod, to keep the batteries charged.
Whenever the battery charge level
symbol shows ‘nearly empty’( ), place the handset on the base unit or charger pod to charge the batteries.
9 Connect the base unit to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into the socket as shown
Switch mains power back on
NOTE: the charger pod does not have | AUSTRALIA |
a connection to the telephone line. |
|
Make sure mains power is switched on at the socket if you want to use the phone — it will not work without electrical power
NEW ZEALAND
The Charge light comes on.
Use the plug to raise the shutter before pushing it into the socket
6
