BASIC USE
Time and date
If you subscribe to Caller Display (see page 22) your DECT 1915/1915+1 should take the time and date settings from the network when you receive an incoming call.
Once you’ve installed your DECT 1915/1915+1, charged the batteries and connected the base unit to the telephone line, ask someone to make a call to you. After hanging up to end the call, press the button to display the calendar. If the year, month and day settings are correct, you don’t need to set them yourself.
If the calendar is not correct, you can set the time and date yourself, as follows:
| In idle mode: |
|
1 | Press the right Soft button to select | Menu |
2 | Press the or button to scroll to | Base |
3 | Press the right Soft button to select | OK |
4 | Press the or button to scroll to |
|
| Date / Time then select OK |
|
uThe display shows Date and the current date, in the format dd : mm : yy
5Key in the date as a six-digit number then select OK *
For example, for 13 October 2004, key in
131004; for 2 January 2005, key in 020105.
u The display shows Time and the current time.
6Key in the time as a
For example, for 9:30 am, key in 0930; for 3:03 pm, key in 1503.
7 | Press the left soft button [Back] twice to go |
| back to idle mode |
*If the settings are correct, you can just select OK without keying in any new information.
12
