Uniden DECT1915 manual Display shows Send Message, Display shows Enter Tel No, For a few moments

SMS text messaging

While writing, you can:

—use the ✱ (star) key to switch between upper-case (capital letters) and lower-case (the first letter of the message is always upper-case);

—use the ￿ and ￿ buttons to move along the lines;

—use the ￿ and ￿ buttons to move to the beginning or end of the message;

—use the left Soft button [Clear] to delete unwanted characters.

When your message is ready —

4 Press the right Soft button [OK]

uThe display shows Send Message

	Save Message
5	Press the right Soft button [OK] to select
	Send Message

uThe display shows Enter Tel No

6Key in the recipient’s phone number, including the full dialling code (even if it’s a local number)

7 Press the right Soft button [OK]

uThe display shows Send

8	Press the right Soft button [OK] to send the
	message

uThe display shows Sending Message . . .

for a few moments.

If you hear an error tone (a double high-pitched ‘beep’) it means the message was not sent. Your handset will automatically try again to send it, at one-minute intervals. To stop the auto-retries, you can go to your Drafts Box and delete the message (see page 38). See pages 50 to 51 for possible reasons and solutions.

35