NetComm NCT480 manual System Specifications, Hardware Specification

Chapter 5 System Specifications

The chapter provides the detail descriptions of technical specification of NCT480 in hardware and software, respectively. This chapter contains the following sections:

•Hardware Specification

•Software Specification

Hardware Specification

This section shows the system hardware specification of the NCT480 mini IP-DSLAM. Table 5-1 lists the hardware specifications of NCT480 system.

Specification

Description

Dimensions	2” x 19” or 23” x 11” (H x W x D)
Weight	With Splitter: 4 Kg
Console interface Management	RJ-45 to RS-232 Female DB-9 adaptor cable
access	Gigabit Ethernet out-band management
Power requirements	85Walt; -36VDC ~ -60VDC; ~2 Amp.
Front Panel Interfaces	2 x RJ-45 Gigabit Ethernet interface (10/100/1000 Base-T)
	2 x mini-GBIC Optical interface (Alternative)
	1 x 10/100 Base-T Management Port
	1 x RS-232 Console Port
	1 x Alarm I/O socket
	2 x Telco-50P Female connectors for POTS
	2x Telco-50P Female conenctors for Lines
	Dual DC power source terminal
ADSL Subscriber interface	48 ports
ADSL Standards support	ANSI T1.413
	ITU-T G.992.1, (G.dmt) Annex A
	ITU-T G.992.2, (G.lite) Annex A
	ITU-T G.992.3 (ADSL2) Annex A, AnnexL
	ITU-T G.992.5 (ADSL2+) Annex A, AnnexM
ATM Protocol	Ethernet over ATM (RFC 1483 bridge)
	IPoA (RFC 1483 route)
	PPPoA (RFC 2364)
	PPPoE (RFC 2516)

NCT480 IP DSLAM User Guide	YML856 Rev3
30	www.netcomm.com.au