NetComm NCT480 manual Connecting a Console, Parameter Setting

Connecting a Console

Complete the following steps to connect the NCT480 Console management.

1Connect the RJ-45 to DB-9 adapter cable to the Console port on the NCT480.

2Connect the other end (Female) to the computer’s COM port.

Figure 4-2 RJ-45 to DB-9-female Adapter cable for Console Management

Figure 4-3 NCT480 Console Port Management Cabling

Configure the PC’s COM port

Use your terminal emulation program (such as HyperTerminal in Windows) to set your COM protocol to the following settings:

Parameter

Setting

Baud rate	9600
Data bits	8
Parity	None
Start bits	1
Stop bits	1
Flow control	None

Table 4-2 NCT480 Console Management Setting

YML856 Rev3	NCT480 IP DSLAM User Guide
www.netcomm.com.au	5