NetComm NCT480 manual Protocol Menu, Vlan Port

Chapter 6 Protocol Menu

Protocol menu contains setting for VLAN, IGMP, DHCP/PPPoE relay configuration and Rapid Spanning Tree Protocol.

This chapter contains the following sections:

•VLAN Port

•Trunk VLAN Setting

•IGMP Snooping

•DHCP & PPPoE Relay

•Spanning Tree Protocol

•Rapid Spanning Tree Protocol

VLAN Port

The VLAN port management allows you to control the accept frame type and ingress filtering status of port interface.

Figure 6-1 VLAN Ports Management Dialog

Item

Description

Accept Frames Type		The set of ports, which are transmitting traffic for this VLAN, as either tagged or
		untagged frames.
		When this is Tagged, the device will discard untagged frames or priority-Tagged frames
		received on this port. When All, untagged frames or Priority-Tagged frames received on
		this port will be accepted and assigned to the PVID for this port.
Ingress Filtering		When this is true, the device will discard incoming frames for VLANs, which do not
		include this Port in its Member set. When false, the port will accept all incoming
		frames.
Default VLAN ID		The VLAND ID to be assigned if untagged frames are accepted.
		Press the ‘Apply’ button to confirm the setting.
	Table 6-1 VLAN Ports Management Dialog Description

YML856 Rev3	NCT480 IP DSLAM User Guide
www.netcomm.com.au