NetComm NCT480 manual System Management, Local Management, IP Network Management

System Management

Operator can provision and manage the NCT480 IP-DSALM through the following system management mode: CLI – Command line management

LCT – A complete SNMP basis NMS (Element Management System) provides GUI operation under Client- Server architecture through in-band or out-band IP interface. (This SNMP IP DSLAM management utility is only applicable to NCT480 firmware R1.43 or older)

Web Management Interface – NCT480 mini IP DSLAM has a web interface for system management. Remote administration, remote firmware upgrade, system configuration, fault and performance management, system diagnostics and subscriber loop tests can all be performed be the web management interface of the NCT480 IP DSLAM. Web management is only applicable to NCT480 running firmware R2.0 or later. Web management of NCT480 IP DSLAM is only compatible under Internet Explorer 6.0 environment.

Changes will be subjected to firmware revision in the future)

Local Management

The NCT480 provide Ethernet interface for CLI connection at local maintenance and operation. An RJ-45 to DB-9 can be used to connect NCT480 to PC via serial port. The NCT480 can also be locally managed by its inbuilt web interface through management port Eth-3 with factory default IP address of 192.168.1.1/24.

IP Network Management

The NCT480 provides out-band management thought management Ethernet interface or its GE interface with proper IP address to associate in the layer 3 network.

NCT480 IP DSLAM User Guide	YML856 Rev3
14	www.netcomm.com.au