NetComm NCT480 manual Snmp Host, Community, Access

SNMP Host

The SNMP Host configuration dialog allows you to manage the Host IP and corresponded SNMP community.

Figure 4-14 SNMP Host Configuration Dialog

Click ‘Add’ button to create a new SNMP Host IP address.

The Host IP is the device (PC) IP address allowed to manage the IP-DSLAM via AMS (Advanced Management Service). It is recommended to limit the number of host device.

Figure 4-15 Add Host IP Address Dialog

Table 4-11 describes fields in the Add Host IP Address Dialog.

Item

Description

IP Address	This specifies the IP address of the manager that has access permissions.
	Valid values: Any valid class A/B/C address
Community	This indicates the community name specify on community configuration.
Access	This indicates the access permissions given to managers with this community name.
	Table 4-11 Configure Host IP

YML856 Rev3	NCT480 IP DSLAM User Guide
www.netcomm.com.au	3