NetComm NCT480 manual Connecting the RJ-21 Subscriber Line Interface

Connecting the RJ-21 Subscriber Line Interface

NCT480 RJ-21 Telco Cable Connecting

Complete the following steps to connect the RJ-21 connector

Figure 4-4 Rear Panel RJ-21 Connector Cabling for NCT480

1Attach the RJ-21 champ cable to connect the NCT480 to the Subscriber MDF corresponding DSL bus sockets.

2Attach the RJ-21 champ cable to connect the NCT480 to the PSTN MDF where the socket with “POTS” labels.

2Screw tight the RJ-21 champ with connect socket, make sure the connection is tight enough due to cabling.

3Repeat Step 1 through Step 2 for each RJ-21 socket as necessary.

NCT480 IP DSLAM User Guide	YML856 Rev3
26	www.netcomm.com.au