Unpacking the NCT480 System
Each NCT480 system units is securely packaged in a shipping box.
To unpack the NCT480 units, complete the following steps:
1Inspect the packing containers.
If any damage or other signs of mishandling are evident, inform both the local freight carrier and Turbo Networks before unpacking. Your freight carrier can provide you with the procedures necessary to file a claim for damages.
2Carefully open the box.
3Remove all packing material.
4Remove the unit form the box.
5Open the accessory kits and boxes that contain the cables, documentation, and management software. Do not use a knife to open these boxes.
Verifying Contents
To verify that your shipment is complete, make sure that you received everything on your packing list, and then compare your packing list to your order. If any items are missing or you need additional information, contact your local supporter.
Inspecting for Damage
After you verify that all of the equipment is included, carefully examine the assemblies, units and cables for any damage resulting from shipping. If you suspect any damage form shipping, contact your local freight carrier for procedures on damage claims.
If you observe any physical defects in the items you ordered, obtain standard warranty service by delivering the defective part to your local supporter during the applicable warranty period.
NCT480 IP DSLAM User Guide | YML856 Rev3 |
22 | www.netcomm.com.au |
