NetComm NCT480 manual Set PPPoA MAC Dialog

Set PPPoA MAC

The PPPoA MAC address to be used in the PPPoE packets from DSLAM to the BRAS is configurable. One MAC address can be assigned to multiple PPPoA terminations. The PPPoE session identifier is additionally used to perform the de-multiplexing in the BRAS to customer direction.

Figure 4-9 Set PPPoA MAC Dialog

Item

Description

PPPoA MAC	Configure the MAC address to be used by the PPPoE tunnel interface.
	Table 4-8 Add PPPoA MAC

NCT480 IP DSLAM User Guide	YML856 Rev3
68	www.netcomm.com.au