
Item
Description
Hello Time | The value that all bridges use for HelloTime when this bridge is acting as the root. |
|
|
Forward Delay | The value that all bridges use for Forward Delay when this bridge is acting as the root. |
|
|
Hold Time | This time value determines the interval length during which no more than two |
| Configuration bridge PDUs shall be transmitted by this node, in units of seconds. |
|
|
Bridge Max Age | The maximum age time of Spanning Tree Protocol information learned from the |
| network on any port before it is discarded, in units of seconds. |
| Valid values: 6 ~ 40 (Seconds) |
|
|
Bridge Hello Time | The amount of time between the transmission of Configuration BPDU (Bridge Protocol |
| Data Units) by this node on any port when it is the root of the spanning tree or trying to |
| become so, in units of second. |
| Valid values: 1 ~ 30 (Seconds) |
|
|
Bridge Forward Delay | This value, measured in units of seconds, controls how fast a port changes its spanning |
| state when moving towards the Forwarding state. The value determines how long the |
| port stays in each of the Listening and Learning states, which precede the Forwarding |
| state. This value is also used, when a topology change has been detected and is |
| underway, to age all dynamic entries in the Forwarding Database. |
| Valid values: 4 ~ 30 (Seconds) |
| Press the ‘Apply’ button to confirm the setting. |
|
|
| Table |
NCT480 IP DSLAM User Guide | YML856 Rev3 |
88 | www.netcomm.com.au |