Layer Information
The Layer Information will display ATM and Channel layer information.
Figure 3-2 Layer Information Dialog
Item
Description
Port selection menu | Select the ADSL port interface to be display with relative parameters. |
|
|
Tx cell | Provides Tx ATM cell counter. |
|
|
Rx cell | Provides Rx ATM cell counter. |
|
|
Idle cell | Number of idle cells. |
|
|
Total cell | Number of total cell |
|
|
User cell | Number of user cell |
|
|
Attain rate (bps) | Indicates the maximum currently attainable data rate by the |
| equal to, or greater than the current line rate. |
|
|
Interleave delay (ms) | Interleave delay for this channel. |
|
|
Block length (byte) | Indicates the length of the channel |
|
|
Time elapse (sec) | Total time elapsed in seconds. |
|
|
Received Blocks | Count of all encoded blocks received on this channel since agent was reset. |
|
|
Transmitted Blocks | Count of all encoded blocks transmitted on this channel since agent was reset. |
|
|
Corrected Blocks | Count of all encoded blocks received with corrected error on this channel since agent reset. |
|
|
Uncorrected Blocks | Count of all encoded blocks received with uncorrected error on this channel since |
| agent was reset. |
|
|
No cell delineation count | Number of packets with NCD (No Cell Delineation) error. |
|
|
Out of cell delineation count | Number of packets with OCD (Out of Cell Delineation) error. |
|
|
Header error check count | Number of packets with HEC (Header Error Check) error. |
|
|
| Table |
YML856 Rev3 | NCT480 IP DSLAM User Guide |
www.netcomm.com.au | 51 |
