Be careful not to insert the mounting screws
into possible electrical hazards such as cables, wiring, or pipes.
1.Insert two mounting screws (with their appropriate anchoring device) into the wall 100mm apart. Allow about 5mm between the wall and screw heads for mounting the phone.
2.Snap the desktop/wall mount adaptor into the bottom of the base as shown.
3.Plug the AC adaptor cord into the
10V DC input jack on the back of the base.
4. Put the AC adaptor cord inside the molded wiring channel. Wrap it around the strain relief notch. Plug the AC adaptor into a standard 240V AC wall outlet.
5. Plug one end of the telephone cord into the TEL LINE jack
on the back of the base. Plug the other end into a telephone jack.
12
