SETTING THE CLOCK

The clock on the DGA940 Answering System starts when power is applied to the base.

To set the correct time:

1. Press and hold clock until a tone sounds.

2.Press skip or repeat

until the correct day is announced. Numbers 0 through 6 display as each day is announced.

3.Press clock again to select the day. The hour setting is announced.

4.Press skip or repeat until you hear the current hour setting. Numbers 1 through 12 display as each hour is announced.

5.Press clock again to select the correct hour.

6.Press skip or repeat until

you hear the current minute setting. The numbers

0 through 59 display as each minute is announced.

7.Press clock again to select the correct minute. The AM/PM setting is announced.

8.The LED displays an A or P. Press skip or

repeat until you hear the correct AM/PM setting.

9.Press clock again to complete your settings.

The DGA940 Answering System announces the correct time.

ANSWERING DEVICE SET-UP

25

Page 28
Image 28
Uniden DGA940 manual Setting the Clock, Press skip or repeat