REMOTE ROOM MONITOR
You may call your answering system from any touch tone phone to monitor sounds in the room where the base is installed.
1.Call your telephone number.
2.During the outgoing message playback, press # followed by your PIN code. (See SELECTING A PIN CODE, page 28.)
3.Press # then * while the system announces the time and date.
You will hear sounds in the room where your base unit is installed.
After 15 seconds, the answering system returns to the Command Waiting mode.
4.Press # then * to monitor the room for another 15 seconds. Or, select another remote function. Hang up to exit the system. The answering system automatically returns to Standby
REMOTE ACCESS AWAY FROM HOME
▼Remote Switch On
In the event that you forgot to turn on your answering machine before you leave home, you can switch it on from a remote location using a
1.Call your telephone number.
2.Wait for 15 rings.
3.The answering system announces the ogm.
4.Hang up. Your answering machine is ready to receive messages.
32
