Four minute option System does not | Uniden DGA940 specs

PROBLEM		SUGGESTION

The answering	●	Make sure the base unit is plugged in.
The answering		Make sure the answering system is turned on.
system does not	●	Make sure the answering system is turned on.
system does not		Press RESET after an AC line spike.
work.	●	Press RESET after an AC line spike.
work.

The answering	●	Set the REC TIME switch to either the one minute or
The answering		four minute option.
system does not		four minute option.
system does not		The memory may be full. Delete some or all of the saved
answer calls.	●	The memory may be full. Delete some or all of the saved
answer calls.		messages.
		messages.

	●	The incoming messages may be too long. Remind callers
Messages are		to leave a brief message.
incomplete	●	The memory may be full. Delete some or all of the saved
		messages.

After a power	●	Record your personal outgoing message again.
failure, the		The default message should remain.
outgoing message
is deleted.

No sound on the	●	Adjust the speaker volume on the base unit.
base unit speaker
base unit speaker
during call
monitoring or				TROUBLESHOOTING
message playback				TROUBLESHOOTING
message playback

Cannot access	●	Make sure you’re using the correct PIN.
remote call-in	•	Make sure that the touch-tone phone you’re using can
features from		transmit the tone for at least two seconds. If it cannot, you
another touch-		may have to use another phone to access your messages.
tone phone.

35

Image 38

Uniden DGA940 manual Four minute option System does not

Contents

Page Functions Repeat Beltclip Holder Arging Contacts Contents Do not short-circuit the battery PrecautionsPrecaution Before you read anything else, please observe the following Important Safety Instructions Precautions Additional Battery Safety Precautions Important Electrical Considerations Telephone Line Problems Welcome FeaturesIntroduction Included in Your Package Installing Installation Considerations DESK/TABLETOP Installation Set the base on a desk or tabletop with Wall Installation Standard wall plate mounting Direct wall mounting Be careful not to insert the mounting screws Installation & Adjusting Installing the Handset Battery Pack Charging optional battery pack Charging the Battery PackInitial battery charging Low battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch With normal usage, your battery should last about one year Handset earpiece volume Adjusting Ringer ToneHandset ringer volume Base ringer volume Remove the slot cover Installing the BeltclipTo attach the beltclip To remove the beltclip To reset the digital security code Headset InstallationRestore power to the base Automatic Digital Code Security Basic phone operation UsingMaking and Receiving Calls Tone If you are dialing in the pulse modeIf you have Call Waiting service and a Flash and Call Waiting Remove the handset from the base Using the memory location featuresDialing a Number in Memory One touch memory dialing Travelling OUT-OF-RANGE Dial the party or service main numberChain Dialing Pabx Connection Integrated Answering Device Message counter LED turns off Setting the Clock Press skip or repeat Press and hold ogm until you hear Preset messageFollowing message is pre-recorded Your message plays back for your review Setting the Ring Time Selecting the Message Time Selecting a PIN Code To select a PIN Playing Your Messages Repeating a Message Skipping a Message Deleting a Message Recording a Voice Memo Using the Reset ButtonReset button is used to initialise the base computer System returns to Standby Remote Room Monitor Remote Access Away from HomeRemote Switch On Other Functions Function Press Troubleshooting Quick Reference Chart Four minute option System does not Base Unit SpecificationsGeneral Handset Warranty Warranty 1800 632 Uniden Australia Pty Limited Part Code UCZZ01655BZ