The tone feature applies only when the base is set to pulse.

The flash + 2 procedure toggles between the incoming and original call (vice versa). The flash + 1 procedure will drop the current call and pick up the incoming call or call on hold.

TONE

If you are dialing in the pulse mode

and need to enter tone digits, press then enter the digits. Once the call has ended, tone mode is cancelled and pulse dialing resumes.

FLASH AND CALL WAITING

If you have Call Waiting service and a

call waiting tone sounds, press flash then 2 to accept the call. After a short pause you will hear the new caller. To return to the original caller, press flash then 1.

PAGE

To locate the handset when it is off the base, press page on the base. The handset beeps for about 15 seconds.

Press talk on the handset twice to stop the beeping.

MUTE

To use the mute feature during a conversation, press mute. The other party will not be able to hear you although you can hear them. To disable the mute feature, press mute again.

 

USING YOUR

21

PHONE

 

Page 24
Image 24
Uniden DGA940 manual Tone, Flash and Call Waiting, Mute, If you are dialing in the pulse mode