Uniden EXI2926 owner manual Flash and Call Waiting, Answering a Call from the Base

note

The flash feature does not function when line 1 and line 2 are on a conference call. (See 3-way conferencing and 4- way conferencing, pages 18 and 19).

note

If you set the handset in AutoTalk on, and the handset is on the base, just pick up the handset and speak. Each line setting is independent for this feature.

Flash and Call Waiting

If you have "Call Waiting" service and a call waiting tone sounds while you are on a call, press delete/flash to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, press delete/flash again.

note You must subscribe through your local telephone company to receive Call Waiting Service.

Answering a Call from the Base

1) The base rings. The corresponding line 1 LED on the base flashes.

2) Press the line 1 and speak.

3) When you f inish the call, press line 1 to hang up.

Answering a Call from the Handset

1) The handset rings and the following screen appears:

(Call) Line 1

2) Press the line 1 to answer your call.

3) When you finish the call, press line 1 on the handset, or return the handset to the base.

Making a Call from the Base

1) Press line 1.

2) Dial the number on the keypad, or use one of the memory features. (See "Making Calls with Memory Dialing", page 22.)

3) When you f inish the call, press line 1 to hang up.

[ 16 ] B A S I C S