note
• To exit the |
memory function |
without dialing |
press m. The |
handset returns |
to standby. |
• Whenever you are |
using a menu |
screen, you must |
press a key within |
Making Calls with Memory Dialing
Follow the steps below to dial a number using a programmed memory location:
With the handset
1) Press m. The handset displays your programmed memory locations.
2) Press ▲up/int’com and dn▼/conf to select the memory location you would like to dial. The following screen appears:
3) Press line 1. The number dials.
01
02 JOHN SMITH
03 UNIDEN
01
02 JOHN SMITH
03 UNIDEN
20 seconds or the |
phone will return |
to standby. |
With the base
1) Press line 1. The line 1 LED lights.
2) Press memory. Enter the memory location number
Chain Dialing
The 30 memory locations on the handset are not limited to phone numbers. You may want to store in memory a group of number (up to 16 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, when you are prompted to enter the account number, simply press m and then the location where the special number has been stored.
Store your special number in memory as you would a phone number. (Refer to "Storing a Phone Number in Memory", on page 21)
Enter a "pause" in the sequence as necessary. A "pause" counts as one digit and represents a two second delay in time between digits as they are sent.
[ 22 ] M E M O RY F E AT U R E S
